<html><head><meta name="color-scheme" content="light dark"></head><body><pre style="word-wrap: break-word; white-space: pre-wrap;">% \iffalse
%
% bitpattern.dtx
%
% This file is part of the bitpattern, a LaTeX package to typeset bit
% pattern diagrams.
% https://bitbucket.org/bourguet/bitpattern
%
% Copyright 2005--2015 Jean-Marc Bourguet
%
% This program is provided under the terms of the LaTeX Project Public
% License distributed from CTAN archives in directory
% macros/latex/base/lppl.txt.
%
% Run LaTeX on the file 'bitpattern.ins' to get a .sty to place in
% your tex hierarchy.
%
% Run LaTeX on the file 'bitpattern.dtx' to get a manual.  If the
% |\OnlyDescription| command is commented out, you get commented
% sources in the manual, else you get only the user's manual part.
%
%&lt;*dtx&gt;
\ProvidesFile{bitpattern.dtx}
%&lt;/dtx&gt;
% \fi
%
%% \CheckSum{412}
%
% \title{Bit pattern diagrams}
% \author{Jean-Marc Bourguet\\
% \texttt{jm@bourguet.org}}
%
% \maketitle
% \begin{abstract}
%   The |bitpattern| package is designed to typeset bit patterns as
%   they may appear in description of data format, hardware registers
%   or transmission protocols.  It covers thus more or less the same
%   application domain as the package |register| and is somewhat
%   related to |bytefield|.
%   
%   Comparared to |register| the formating is more compact, the
%   syntax less verbose and |bitpattern| allows to choose between big
%   endian and little endian bit numbering.  But |bitpattern| is less
%   well adapted to the use of long names for the fields and has no
%   provision for a reset value. |bytefield| is more adequate to
%   describe multi-word protocols, while |bitpattern| is more adapted
%   to describe the intra-word structure of a single word.
% \end{abstract}
%
% \iffalse
%&lt;*driver&gt;
\documentclass{ltxdoc}
\RequirePackage[numberFieldsOnce,bigEndian,numberBitsAbove]%
        {bitpattern}
\renewcommand\descriptionlabel[1]{\hspace{\labelsep}\texttt{#1}}
%\OnlyDescription
\begin{document}
\DocInput{bitpattern.dtx}
\end{document}
%&lt;/driver&gt;
% \fi
% \section{Examples}
%
% We'll the instruction formats of two processors to describe the
% features of |bitpattern|, the DEC PDP-10 and the Intel 8080.
%
% The PDP-10 was a word-adressable 36-bit computer, something quite
% strange to our eyes (it's most familiar feature is probably the
% fact that it uses 2's complement) and the reason for which I've
% chosen it is that it was the computer on which \TeX{} was first
% implemented.
%
% The PDP-10 has two instruction formats, one used for most of the
% instructions:
%
% \noindent\bitpattern{Op}[9]{AC}[4]IX[4]Y[18]/
%
% \noindent and the other used for IO instructions:
%
% \noindent\bitpattern[numberBitsBelow]{111}[3]{Dev}[7]{IOP}[3]IX[4]Y[18]/
%
% As well at putting the bit numbers above or below the field
% description, |bitpattern| allows to number all the bits:
%
% \noindent\bitpattern[numberAllBits]{Op}[9]{AC}[4]IX[4]Y[18]/
%
% \noindent or only at the start and end of a field:
%
% \noindent\bitpattern[numberBitsBelow,numberFieldsTwice]{111}[3]{Dev}[7]{IOP}[3]IX[4]Y[18]/
%
% Having a long field like \emph{Y} here may take more place than
% wanted.  |bitpattern| allows to reduce that:
%
% \noindent\bitpattern{Op}[9]{AC}[4]IX[4]Y[18][9]/
%
% Other ways to avoid overstepping in the margin include splitting
% the pattern in two:
%
% \noindent\bitpattern[bitWidth=1.5em,numberAllBits]{Op}[9]{AC}[4]IX[4]/ \\
% \hspace*{1pt plus 1filll}\bitpattern[numberBitsBelow,startBit=18,bitWidth=1.5em,numberAllBits] Y[18]/
%
% \noindent and reducing the width of the cells:
%
% {\centering\bitpattern[bitWidth=0.8em]{Op}[9]{AC}[4]IX[4]Y[18]/ \par}
%
% The PDP-10 numbered its bits in the big endian way.  That's not the
% case of the Intel 8080. The 8080 was an 8-bit computer.  Trying to
% pack instructions in 8-bit forces to use a lot of formats.  One of
% them was used for the move instruction, and let's take that
% opportunity to start and compact the layout of the bit field by
% changing the format of the bit numbers and the field descriptions:
%
% \renewcommand\bpFormatBitNumber[1]{{\tiny\ttfamily\emph{\strut#1}}}
% \renewcommand\bpFormatField[1]{{\scriptsize\ttfamily\strut#1}}
% {\centering\bitpattern[littleEndian,startBit=7,numberBitsBelow]{01}[2]{D}[3]{S}[3]/\par}
%
%
% \bpSetTickHeight{1pt}
% \newlength{\bpDocExampleHeight}
% \settoheight{\bpDocExampleHeight}{{\scriptsize\ttfamily 0}}
% \newcommand{\bpDocExampleStrut}{\rule{0pt}{\bpDocExampleHeight}}
% \renewcommand\bpFormatField[1]{{\scriptsize\ttfamily\bpDocExampleStrut #1}}
%
% After that it is possible to still be more compact by removing the
% numbers, reducing the height of the ticks and avoiding the provide
% the space for ascender and descenders in the field name (obviously
% that is possible only with convenient field names).  When that's
% done, you can put a bit pattern in a paragraph without disturbing
% it too much, like this
% \bitpattern[noBitNumbers,littleEndian,startBit=7]{01}[2]{D}[3]{S}[3]/.
% With some text afterwards to see how the next line is handled.  The
% result seems quite readable, remark for instance that the baseline
% of the field description is aligned with the baseline of the line
% in which it is included.
%
% \section{Interface}
%
% \subsection{\cmd{\bitpattern}}
% 
% \DescribeMacro{\bitpattern} The |\bitpattern| macro is the macro
% which formats the patterns.
%
% \begin{quote}
% \cmd{\bitpattern}\oarg{format}\marg{name}\oarg{size}\oarg{width}\dots\verb+/+
% \end{quote}
%
% The first optional argument allows to control how the formatting is
% made and is the combination of the following keys:
% \begin{description}
% \item[littleEndian] indicates that bit numbering is little endian,
%   that is the leftward bit has the biggest number;
% \item[bigEndian] indicates that bit numbering is big endian, that
%   is the leftward bit has the lowest number;
% \item[numberBitsAbove] indicates that the bit numbers should be put
%   above the fields;
% \item[numberBitsBelow] indicates that the bit numbers should be put
%   below the fields;
% \item[noBitNumbers] indicates that there should be no bit numbers;
% \item[numberFieldsOnce] indicates that the fields should have
%   only one bit number;
% \item[numberFieldsTwice] indicates that the fields should have
%   two bit numbers;
% \item[numberAllBits] indicates that the fields shouldn't have a bit
%   number indication;
% \item[startBit=X] indicates that the number for the leftmost bit
%   should be $X$;
% \item[bitWidth=dimen] indicates that the size taken by a bit should
%   be \emph{dimen};
% \item[tickHeight=dimen] indicates that the size taken by the small
%   ticks marking the bits should be \emph{dimen}.
% \end{description}
%
% After the optional argument comes the description of the
% fields. Each field is described by its name as a mandatory argument
% (which does not have to be included in braces if it takes one
% character) followed by two optional arguments giving the size of
% the field (1 if omitted) and the width it should take (the same as
% its size if it is not specified).
% 
% Field descriptions are ended by a \verb+/+.
%
% \subsection{Package options}
%
% The package |bitpattern| accept the following options which set up
% the default values for the formatting controls:
% \begin{description}
% \item[littleEndian] indicates that the default for bit numbering is
%   little endian, that is the leftward bit has the biggest number;
% \item[bigEndian] indicates that the default for bit numbering is
%   big endian, that is the leftward bit has the lowest number;
% \item[numberBitsAbove] indicates that by default the bit numbers
%   should be put above the fields;
% \item[numberBitsBelow] indicates that by default the bit numbers
%   should be put below the fields;
% \item[noBitNumbers] indicates that by default there should be no
%   bit numbers;
% \item[numberFieldsOnce] indicates that by default the fields
%   should have only one bit number;
% \item[numberFieldsTwice] indicates that by default the fields
%   should have two bit numbers;
% \item[numberAllBits] indicates that by default the fields shouldn't
%   have a bit number indication.
% \end{description}
%
% \subsection{Commands controlling the format}
%
% \DescribeMacro{\bpLittleEndian} |\bpLittleEndian| changes the
% default bit numbering to little endian.
%
% \DescribeMacro{\bpBigEndian} |\bpBigEndian| changes the default bit
% numbering to little endian.
%
% \DescribeMacro{\bpNumberBitsAbove} |\bpNumberBitsAbove| changes the
% default to having the numbering above the fields.
%
% \DescribeMacro{\bpNumberBitsBelow} |\bpNumberBitsBelow| changes the
% default to having the numbering below the fields.
%
% \DescribeMacro{\bpNoBitNumbers} |\bpNoBitNumbers| changes the
% default to having no numbering.
%
% \DescribeMacro{\bpNumberFieldsOnce} |\bpNumberFieldsOnce| changes the
% default to having the numbering done once per field.
%
% \DescribeMacro{\bpNumberFieldsTwice} |\bpNumberFieldsTwice| changes
% the default to having the numbering done twice per field.
%
% \DescribeMacro{\bpNumberAllBits} |\bpNumberAllBits| changes the
% default to having the numbering done for all bits of a field.
%
% \begin{quote}
% \cmd{\bpStartAtBit}\marg{number}
% \end{quote}
%
% \DescribeMacro{\bpStartAtBit} |\bpStartAtBit| gives the default bit
% number of the leftmost bit.
%
% \begin{quote}
% \cmd{\bpSetBitWidth}\marg{length}
% \end{quote}
%
% \DescribeMacro{\bpSetBitWidth} |\bpSetBitWidth| gives the default
% bit width
%
% \begin{quote}
% \cmd{\bpSetTickHeight}\marg{length}
% \end{quote}
%
% \DescribeMacro{\bpSetTickHeight} |\bpSetTickHeight| gives the
% default height for the ticks marking the bits in a multi-bit field.
%
% \DescribeMacro{\bpFormatField} |\bpFormatField| is a one argument
% macro used fo format the field.  It can be replaced.  Care should
% be taken to format all the fields with the same height, so putting
% a |\strut| in the replacement is probably in order.
%
% \DescribeMacro{\bpFormatBitNumber} |\bpFormatBitNumber| is a one
% argument macro used fo format the bit numbers.  It can be replaced.
% Care should be taken to format all the bit numbers with the same
% height, so putting a |\strut| in the replacement is perhaps in
% order.
%
% \section{Examples revisited}
%
% \bpSetTickHeight{2pt}
% \renewcommand\bpFormatField[1]{\strut\emph{#1}}
% \renewcommand\bpFormatBitNumber[1]{{\tiny\sffamily\strut #1}}
% |bitpattern| was loaded by:
% \begin{verbatim}
%     \RequirePackage[numberFieldsOnce,bigEndian,numberBitsAbove]{bitpattern}
% \end{verbatim}
% \smallskip
% \noindent\bitpattern{Op}[9]{AC}[4]IX[4]Y[18]/
% \begin{verbatim}
%     \bitpattern{Op}[9]{AC}[4]IX[4]Y[18]/
% \end{verbatim}
%
% \smallskip
% \noindent\bitpattern[numberBitsBelow]{111}[3]{Dev}[7]{IOP}[3]IX[4]Y[18]/
% \begin{verbatim}
%     \bitpattern[numberBitsBelow]{111}[3]{Dev}[7]{IOP}[3]IX[4]Y[18]/
% \end{verbatim}
%
% \smallskip
% \noindent\bitpattern[numberAllBits]{Op}[9]{AC}[4]IX[4]Y[18]/
% \begin{verbatim}
%     \bitpattern[numberAllBits]{Op}[9]{AC}[4]IX[4]Y[18]/
% \end{verbatim}
%
% \smallskip
% \noindent\bitpattern[numberBitsBelow,numberFieldsTwice]{111}[3]{Dev}[7]{IOP}[3]IX[4]Y[18]/
% \begin{verbatim}
%     \bitpattern[numberBitsBelow,numberFieldsTwice]%
%            {111}[3]{Dev}[7]{IOP}[3]IX[4]Y[18]/
% \end{verbatim}
%
% \smallskip
% \noindent\bitpattern[numberBitsBelow,numberFieldsTwice]111{Dev}[7]{IOP}[3]IX[4]Y[18]/
% \begin{verbatim}
%     \bitpattern[numberBitsBelow,numberFieldsTwice]%
%            111{Dev}[7]{IOP}[3]IX[4]Y[18]/
% \end{verbatim}
%
% \smallskip
% \noindent\bitpattern{Op}[9]{AC}[4]IX[4]Y[18][9]/
% \begin{verbatim}
%     \bitpattern{Op}[9]{AC}[4]IX[4]Y[18][9]/
% \end{verbatim}
%
% \smallskip
% \noindent\bitpattern[bitWidth=1.5em,numberAllBits]{Op}[9]{AC}[4]IX[4]/ \\
% \hspace*{1pt plus 1filll}\bitpattern[numberBitsBelow,startBit=18,bitWidth=1.5em,numberAllBits] Y[18]/
%
% This wasn't composed directly by as two bit patterns, using the
% possibility of specifying a starting bit.  To put a nicer touch,
% the width of the cells has been expanded (the default width had an
% overlap so small that going into the margin is a better format),
% and the numbering was put above the pattern for the first and below
% for the second.
% \begin{verbatim}
% \noindent\bitpattern[bitWidth=1.5em,numberAllBits]{Op}[9]{AC}[4]IX[4]/ \\
% \hspace*{1pt plus 1filll}
%      \bitpattern[numberBitsBelow,startBit=18,bitWidth=1.5em,numberAllBits] Y[18]/
% \end{verbatim}
%
% \smallskip
% {\centering\bitpattern[bitWidth=0.8em]{Op}[9]{AC}[4]IX[4]Y[18]/ \par}
% \begin{verbatim}
% {\centering\bitpattern[bitWidth=0.8em]{Op}[9]{AC}[4]IX[4]Y[18]/ \par}
% \end{verbatim}
%
% \smallskip
% \renewcommand\bpFormatBitNumber[1]{{\tiny\ttfamily\emph{\strut#1}}}
% \renewcommand\bpFormatField[1]{{\scriptsize\ttfamily\strut#1}}
% {\centering\bitpattern[littleEndian,startBit=7,numberBitsBelow]{01}[2]{D}[3]{S}[3]/\par}
% \begin{verbatim}
% \renewcommand\bpFormatBitNumber[1]{{\tiny\ttfamily\emph{\strut#1}}}
% \renewcommand\bpFormatField[1]{{\scriptsize\ttfamily\strut#1}}
% {\centering\bitpattern[littleEndian,startBit=7,numberBitsBelow]{01}[2]{D}[3]{S}[3]/\par}
% \end{verbatim}
%
% \smallskip
% \bpSetTickHeight{1pt}
% \renewcommand\bpFormatField[1]{{\scriptsize\ttfamily\bpDocExampleStrut #1}}
% {\centering\bitpattern[noBitNumbers,littleEndian,startBit=7]{01}[2]{D}[3]{S}[3]/\par}
% This example was made to be as compact as possible. Expanding the
% strut a little more vertically wouldn't be unwise.
% \begin{verbatim}
% \bpSetTickHeight{1pt}
% \newlength{\bpDocExampleHeight}
% \settoheight{\bpDocExampleHeight}{\scriptsize\ttfamily 0}
% \newcommand{\bpDocExampleStrut}{\rule{0pt}{\bpDocExampleHeight}}
% \renewcommand\bpFormatBitNumber[1]{{\tiny\ttfamily\emph{\strut#1}}}
% \renewcommand\bpFormatField[1]{{\scriptsize\ttfamily\bpDocExampleStrut #1}}
% {\centering\bitpattern[noBitNumbers,littleEndian,startBit=7]{01}[2]{D}[3]{S}[3]/\par}
% \end{verbatim}
% Note that if you put a descender, the formatting is then disturbed:
% {\centering\bitpattern[noBitNumbers,littleEndian,startBit=7]{01}[2]{D}[3]{p}[3]/\par}
%
% \smallskip
% It is to be noted that usually one does not change the formatting
% for every pattern, so setting the optional argument of
% \cs{bitpattern} is rarely used.
% \StopEventually{}
%
% \newpage
% \section{Implementation}
%
% First let's have a standard preamble and indicates the package we
% requires.
%
%    \begin{macrocode}
\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{bitpattern}[2015/12/11 bit pattern diagrams]

\RequirePackage{keyval}
\RequirePackage{calc}
\RequirePackage{multido}
%    \end{macrocode}
% Now we'll declare some new |\if| commands which will be set to
% describe the options.
%    \begin{macrocode}
\newif\ifbp@NumberBitsAbove
\newif\ifbp@NumberBitsBelow
\newif\ifbp@HasBitNumbers
\newif\ifbp@NumberFieldTwice
\newif\ifbp@NumberAllBits
\newif\ifbp@NumberBitsBigEndian
%    \end{macrocode}
% We need a counter to store the starting bit number.  We are not
% using the \LaTeX{} way because we want to use it locally and not
% globally.
%    \begin{macrocode}
\newcount\bp@StartBit
%    \end{macrocode}
% \LaTeX{} length behaves are needed, so use them.
%    \begin{macrocode}
\newlength{\bp@BitWidth}
\newlength{\bp@TickHeight}
%    \end{macrocode}
% 
% First the user level macros allowing to change the default.  They
% are easy, the just set the |\if|.
%    \begin{macrocode}
\newcommand\bpLittleEndian
{\bp@NumberBitsBigEndianfalse}

\newcommand\bpBigEndian
{\bp@NumberBitsBigEndiantrue}

\newcommand\bpNumberBitsAbove
{\bp@NumberBitsAbovetrue
  \bp@NumberBitsBelowfalse}

\newcommand\bpNumberBitsBelow
{\bp@NumberBitsAbovefalse
  \bp@NumberBitsBelowtrue}

\newcommand\bpNoBitNumbers
{\bp@HasBitNumbersfalse}

\newcommand\bpNumberFieldsOnce
{\bp@HasBitNumberstrue
  \bp@NumberFieldTwicefalse
  \bp@NumberAllBitsfalse}

\newcommand\bpNumberFieldsTwice
{\bp@HasBitNumberstrue
  \bp@NumberFieldTwicetrue
  \bp@NumberAllBitsfalse}

\newcommand\bpNumberAllBits
{\bp@HasBitNumberstrue
  \bp@NumberFieldTwicetrue
  \bp@NumberAllBitstrue}
%    \end{macrocode}
% 
% About as easy, macros setting the counter and the lengths.
%    \begin{macrocode}
\newcommand\bpStartAtBit[1]{\bp@StartBit=#1}
\newcommand\bpSetBitWidth[1]{\setlength{\bp@BitWidth}{#1}}
\newcommand\bpSetTickHeight[1]{\setlength{\bp@TickHeight}{#1}}
%    \end{macrocode}
% 
% Now we set up the keyval handling
%    \begin{macrocode}
\define@key{bitpattern}{littleEndian}[true]{\bpLittleEndian}
\define@key{bitpattern}{bigEndian}[true]{\bpBigEndian}
\define@key{bitpattern}{numberBitsAbove}[true]{\bpNumberBitsAbove}
\define@key{bitpattern}{numberBitsBelow}[true]{\bpNumberBitsBelow}
\define@key{bitpattern}{noBitNumbers}[true]{\bpNoBitNumbers}
\define@key{bitpattern}{numberFieldsOnce}[true]{\bpNumberFieldsOnce}
\define@key{bitpattern}{numberFieldsTwice}[true]{\bpNumberFieldsTwice}
\define@key{bitpattern}{numberAllBits}[true]{\bpNumberAllBits}

\define@key{bitpattern}{startBit}{\bpStartAtBit{#1}}
\define@key{bitpattern}{bitWidth}{\bpSetBitWidth{#1}}
\define@key{bitpattern}{tickSize}{\bpSetTickHeight{#1}}
%    \end{macrocode}
% 
% And we can do the same for the package options.
%    \begin{macrocode}
\DeclareOption{littleEndian}{\bpLittleEndian}
\DeclareOption{bigEndian}{\bpBigEndian}
\DeclareOption{numberBitsAbove}{\bpNumberBitsAbove}
\DeclareOption{numberBitsBelow}{\bpNumberBitsBelow}
\DeclareOption{noBitNumbers}{\bpNoBitNumbers}
\DeclareOption{numberFieldsOnce}{\bpNumberFieldsOnce}
\DeclareOption{numberFieldsTwice}{\bpNumberFieldsTwice}
\DeclareOption{numberAllBits}{\bpNumberAllBits}
%    \end{macrocode}
% 
% Set up the default values.
%    \begin{macrocode}
\bpLittleEndian
\bpNumberBitsBelow
\bpNumberFieldsOnce
\AtEndOfPackage{\ifbp@NumberBitsBigEndian
  \bpStartAtBit{0}\else\bpStartAtBit{7}\fi}
\bpSetBitWidth{1em}
\bpSetTickHeight{2pt}
%    \end{macrocode}
% 
% And provide the two formatting commands we are using for the
% numbers and the fields.
%    \begin{macrocode}
\providecommand\bpFormatField[1]{\strut\emph{#1}}
\providecommand\bpFormatBitNumber[1]{{\tiny\sffamily\strut #1}}
%    \end{macrocode}
% 
% A few more variables
%    \begin{macrocode}
\newcount\bp@CurBit
\newlength{\bp@FieldWidth}
\newlength{\bp@RuleWidth}\setlength{\bp@RuleWidth}{0.4pt}
\newsavebox{\bp@TickBox}
%    \end{macrocode}
% 
% Now two wrappers around the public formatting hook which call them
% only when the settings are appropriate.
%    \begin{macrocode}
\newcommand\bp@FormatTopBit[1]{\ifbp@HasBitNumbers
  \ifbp@NumberBitsAbove\bpFormatBitNumber{#1}\fi\fi}
\newcommand\bp@FormatBottomBit[1]{\ifbp@HasBitNumbers
  \ifbp@NumberBitsBelow\bpFormatBitNumber{#1}\fi\fi}
%    \end{macrocode}
% 
% And an helper to get the rule we want for ticks.
%    \begin{macrocode}
\newcommand\bp@Tick{\rule{\bp@RuleWidth}{\bp@TickHeight}}
%    \end{macrocode}
% 
% Small utility to get a vbox without additional vertical spacing
%    \begin{macrocode}
\newcommand\bp@vbox[3]
{\parbox[#1]{#2}{\lineskip=0pt\lineskiplimit=0pt\baselineskip=0pt\relax#3}}
%    \end{macrocode}
% The function used to put the broken rule when the width is smaller
% than the size.
%    \begin{macrocode}
\newcommand\bp@BrokenRuleFill{\dimen0=\bp@RuleWidth\multiply\dimen0 3
\leaders \hrule height \bp@RuleWidth\hfill
\xleaders\hbox to \dimen0{\rule{\bp@RuleWidth}{\bp@RuleWidth}\hfill}\hfill
\leaders \hrule height \bp@RuleWidth\hfill}
%    \end{macrocode}
% The function used to put the ticks when the width is smaller than
% the size.
%    \begin{macrocode}
\newcommand\bp@BrokenTicks
{\usebox{\bp@TickBox}\usebox{\bp@TickBox}\hfill\usebox{\bp@TickBox}}
%    \end{macrocode}
% The function used to put the ticks in the other cases.
%    \begin{macrocode}
\newcommand\bp@FillWithTicks
{\leaders\hbox to \bp@BitWidth{\usebox{\bp@TickBox}}\hfill}
%    \end{macrocode}
%
% The functions putting the rule and the ticks, choosing between the
% \emph{broken} and non broken version above.  They take two
% arguments, the size and the width.
%    \begin{macrocode}
\newcommand\bp@RuleFill[2]
{\ifnum #1 = #2
  \leaders \hrule height \bp@RuleWidth\hfill
\else
  \bp@BrokenRuleFill
\fi}
\newcommand\bp@TicksFill[2]
{\ifnum #1 = #2
  \bp@FillWithTicks
\else
  \bp@BrokenTicks
\fi}
%    \end{macrocode}
% Now a macro to put the bit numbers. It is called with two
% arguments, the width and the alignment.  For broken fiels,
% NumberAllBits will be changed to NumberFieldTwice before calling
% this.
%    \begin{macrocode}
\newcommand\bp@MakeNumbers[2]{\begingroup\ifbp@NumberAllBits
%    \end{macrocode}
% Numbering all the bits is easy, just pay attention to the
% direction.
%    \begin{macrocode}
\mbox{\multido{}{#1}{%
    \makebox[\bp@BitWidth]{\bpFormatBitNumber{\the\bp@CurBit}}%
    \advance\bp@CurBit\ifbp@NumberBitsBigEndian 1\else -1\fi}}%
\else\ifbp@NumberFieldTwice
%    \end{macrocode}
% Numbering twice per field has to handle the case where the width is
% 1.
%    \begin{macrocode}
\mbox{%
  \makebox[\bp@FieldWidth]%
     {\makebox[\bp@BitWidth][#2]{\bpFormatBitNumber{\the\bp@CurBit}}%
       \ifnum #1 &gt; 1
         \advance\bp@CurBit\ifbp@NumberBitsBigEndian #1\else -#1\fi
         \advance\bp@CurBit\ifbp@NumberBitsBigEndian -1\else 1\fi
         \hfill\makebox[\bp@BitWidth][#2]%
                    {\bpFormatBitNumber{\the\bp@CurBit}}\fi}}%
\else
%    \end{macrocode}
% When numbering only once, one has to pay attention to the alignment
% so that the value is increased beforehand if needed.
%    \begin{macrocode}
\ifx#2r
  \ifnum #1 &gt; 1
    \advance\bp@CurBit\ifbp@NumberBitsBigEndian #1\else -#1\fi
    \advance\bp@CurBit\ifbp@NumberBitsBigEndian -1\else 1\fi
\fi\fi
\makebox[\bp@FieldWidth][#2]{\bpFormatBitNumber{\the\bp@CurBit}}%
\fi\fi\endgroup}
%    \end{macrocode}
% Call |bp@MakeNumbers| in an appropriate way for the top numbering
%    \begin{macrocode}
\newcommand\bp@MakeTopNumbers[1]%
{\ifbp@HasBitNumbers
    \ifbp@NumberBitsAbove
      \bp@MakeNumbers{#1}{l}
    \else
      \makebox[\bp@FieldWidth][l]{\hfill}\fi\fi}
%    \end{macrocode}
% Call |bp@MakeNumbers| in an appropriate way for the bottom
% numbering
%    \begin{macrocode}
\newcommand\bp@MakeBottomNumbers[1]%
{\ifbp@HasBitNumbers
    \ifbp@NumberBitsBelow
      \bp@MakeNumbers{#1}{r}
    \else
      \makebox[\bp@FieldWidth][r]{\hfill}\fi\fi}
%    \end{macrocode}
% The \cs{bitpattern} is easy, just parse the optional argument in a
% group so that the changes are local and do some more intialization.
% The hard work is delegated to \cs{bp@FieldIfPresent}.
%    \begin{macrocode}
\newcommand{\bitpattern}[1][]{%
  \begingroup
    \setkeys{bitpattern}{#1}%
    \savebox{\bp@TickBox}[\bp@BitWidth]{\bp@Tick\hfill}%
    \bp@CurBit=\bp@StartBit%
    \bp@FieldIfPresent}
%    \end{macrocode}
% \cs{bp@FieldIfPresent} checks if we are done and format a field if
% not.
%    \begin{macrocode}
\newcommand{\bp@FieldIfPresent}{\@ifnextchar/{\bp@Done}{\bp@Field}}
%    \end{macrocode}
% \cs{bp@field} checks if there is an optional argument or call
% \cs{bp@DoField}.
%    \begin{macrocode}
\newcommand{\bp@Field}[1]%
{\@ifnextchar[{\bp@SizedField[#1]}{\bp@DoField[#1][1][1]}}
%    \end{macrocode}
% \cs{bp@field} checks if there is a second optional argument and
% ensure that \cs{bp@DoField} is called with all the arguments set
% up.
%    \begin{macrocode}
\def\bp@SizedField[#1][#2]%
{\@ifnextchar[{\bp@DoField[#1][#2]}{\bp@DoField[#1][#2][#2]}}
%    \end{macrocode}
% First argument is field name, second is size, third is width.  Do
% some initialization and then format a compact vbox (two are used so
% that the baseline is the one of the field names).
%    \begin{macrocode}
\def\bp@DoField[#1][#2][#3]%
{\setlength{\bp@FieldWidth}{\bp@BitWidth * #3}%
  \ifnum #2 &gt; #3 \ifbp@NumberAllBits\bpNumberFieldsTwice\fi\fi
  \bp@vbox{t}{\bp@FieldWidth}{%
    \bp@vbox{b}{\bp@FieldWidth}{%
      \bp@MakeTopNumbers{#2}
      \makebox[\bp@FieldWidth][s]{\bp@RuleFill{#2}{#3}}
      \makebox[\bp@FieldWidth][s]{\bp@TicksFill{#2}{#3}}
      \makebox[\bp@FieldWidth][s]%
        {\vrule width \bp@RuleWidth\hfil\bpFormatField{#1}\hfil}}
    \makebox[\bp@FieldWidth][s]{\bp@TicksFill{#2}{#3}}
    \makebox[\bp@FieldWidth][s]{\bp@RuleFill{#2}{#3}}
    \bp@MakeBottomNumbers{#2}}%
  \advance\bp@CurBit\ifbp@NumberBitsBigEndian #2\else -#2\fi%
  \bp@FieldIfPresent}
%    \end{macrocode}
% Finalize the pattern by putting a file vertical rule.
%    \begin{macrocode}
\def\bp@Done/{\bp@vbox{t}{\bp@RuleWidth}{%
    \bp@vbox{b}{\bp@RuleWidth}{%
      \makebox[\bp@RuleWidth]{\bp@FormatTopBit{}\hfill}
      \makebox[\bp@RuleWidth]{\bp@RuleFill{0}{0}}  
      \makebox[\bp@RuleWidth]{\bp@Tick\hfill}
      \makebox[\bp@RuleWidth]%
        {\vrule width \bp@RuleWidth\hfil\bpFormatField{}\hfil}}
    \makebox[\bp@RuleWidth]{\bp@Tick\hfill}
    \makebox[\bp@RuleWidth]{\bp@RuleFill{0}{0}}
    \makebox[\bp@RuleWidth]{\hfill\bp@FormatBottomBit{}}}\endgroup}
%    \end{macrocode}
% We can now process the option of the package and we are done.
%    \begin{macrocode}
\ProcessOptions
%    \end{macrocode}
%
% \Finale
%
\endinput
%%% Local Variables:
%%% fill-column: 69
%%% End:
</pre></body></html>