%%
%% This is file `DesignCon.tex',
%% Version 1.0
%% 
%% Author: Peter J. Pupalaikis (pete_pope at hotmail dot com)
%% Copyright 2012 Peter J. Pupalaikis
%% 
%% This work may be distributed and/or modified under the
%% conditions of the LaTeX Project Public License, either
%% version 1.3 of this license or (at your option) any
%% later version.
%% The latest version of the license is in
%% http://www.latex-project.org/lppl.txt
%% and version 1.3 or later is part of all distributions of
%% LaTeX version 2003/06/01 or later.
%% 
%% This work consists of the files listed in the README file.
%% 
%% THIS MUST BE COMPILED WITH XeLaTeX.
%% USE XeLaTeX+MakeIndex+BibTeX in TeXworks
%%
\documentclass[12pt,twoside,english,american]{designcon}
\usepackage{fontspec}
\setmainfont[Mapping=tex-text]{Times New Roman}
\setsansfont[Mapping=tex-text]{Arial Black}
\usepackage{refstyle}

\makeatletter
\AtBeginDocument{\providecommand\figref[1]{\ref{fig:#1}}}
\AtBeginDocument{\providecommand\eqref[1]{\ref{eq:#1}}}
\RS@ifundefined{subref}
  {\def\RSsubtxt{section~}\newref{sub}{name = \RSsubtxt}}
  {}
\RS@ifundefined{thmref}
  {\def\RSthmtxt{theorem~}\newref{thm}{name = \RSthmtxt}}
  {}
\RS@ifundefined{lemref}
  {\def\RSlemtxt{lemma~}\newref{lem}{name = \RSlemtxt}}
  {}
\makeatother

\usepackage{xunicode}
\usepackage{polyglossia}
\setdefaultlanguage[variant=american]{english}
\setotherlanguage{english}

\begin{document}

\begin{acronym}
\acro{DFT}{discrete Fourier transform}
\acro{PCB}{printed circuit board}
\end{acronym}

\setHeading{DesignCon 2013\vspace{2.5in}}

\title{Title}

\setSkip{\vspace{3in}}

\setAuthorInfo{First Author Name, Company}
\setAuthorInfo{First Author E-mail, Phone Number}
\setAuthorInfo{~}
\setAuthorInfo{Second Author Name, Company}
\setAuthorInfo{Second Author E-mail, Phone Number etc.}

\maketitle

\section*{Abstract}

Abstract here

\section*{Biography}

Bio here

\designConPaperStart

\begin{figure}
\begin{centering}
%
% include a PDF or other picture here - I'm including a tikz picture as an example.
%
\begin{tikzpicture}[x=1.00mm, y=1.00mm, inner xsep=0pt, inner ysep=0pt, outer xsep=0pt, outer ysep=0pt]
\path[line width=0mm] (5.00,44.14) rectangle +(47.67,32.00);
\definecolor{L}{rgb}{0,0,0}
\definecolor{F}{rgb}{0,0,0}
\path[line width=0.30mm, draw=L, fill=F] (20.01,69.99) circle (0.51mm);
\path[line width=0.30mm, draw=L] (9.95,69.98) -- (20.00,70.00);
\path[line width=0.30mm, draw=L, fill=F] (20.00,70.00) -- (17.20,70.70) -- (17.20,69.30) -- (20.00,70.00) -- cycle;
\path[line width=0.30mm, draw=L, fill=F] (20.02,49.99) circle (0.53mm);
\draw(9.00,69.00) node[anchor=base east]{\fontsize{11.38}{13.66}\selectfont $1$};
\path[line width=0.30mm, draw=L] (19.95,69.98) -- (43.00,70.00);
\path[line width=0.30mm, draw=L, fill=F] (43.00,70.00) -- (40.20,70.70) -- (40.20,69.30) -- (43.00,70.00) -- cycle;
\path[line width=0.30mm, draw=L] (20.00,70.00) .. controls (25.00,65.00) and (25.00,55.01) .. (20.00,50.01);
\path[line width=0.30mm, draw=L, fill=F] (20.00,50.01) -- (22.20,51.87) -- (21.07,52.69) -- (20.00,50.01) -- cycle;
\path[line width=0.30mm, draw=L, fill=F] (43.01,69.99) circle (0.51mm);
\path[line width=0.30mm, draw=L] (43.01,50.01) .. controls (38.01,55.01) and (38.01,65.00) .. (43.01,70.00);
\path[line width=0.30mm, draw=L, fill=F] (43.01,70.00) -- (40.82,68.14) -- (41.95,67.32) -- (43.01,70.00) -- cycle;
\path[line width=0.30mm, draw=L, fill=F] (43.02,49.99) circle (0.53mm);
\path[line width=0.30mm, draw=L] (43.00,49.98) -- (19.95,50.00);
\path[line width=0.30mm, draw=L, fill=F] (19.95,50.00) -- (22.75,49.30) -- (22.75,50.70) -- (19.95,50.00) -- cycle;
\draw(24.00,59.00) node[anchor=base west]{\fontsize{11.38}{13.66}\selectfont $S_{11}$};
\draw(39.00,59.00) node[anchor=base east]{\fontsize{11.38}{13.66}\selectfont $S_{22}$};
\draw(30.00,71.00) node[anchor=base]{\fontsize{11.38}{13.66}\selectfont $S_{21}$};
\draw(30.00,47.00) node[anchor=base]{\fontsize{11.38}{13.66}\selectfont $S_{12}$};
\path[line width=0.30mm, draw=L] (43.01,70.00) .. controls (48.01,65.00) and (48.01,55.01) .. (43.01,50.01);
\path[line width=0.30mm, draw=L, fill=F] (43.01,50.01) -- (45.20,51.87) -- (44.07,52.69) -- (43.01,50.01) -- cycle;
\draw(48.00,59.00) node[anchor=base west]{\fontsize{11.38}{13.66}\selectfont $\Gamma$};
\draw(17.00,49.00) node[anchor=base]{\fontsize{11.38}{13.66}\selectfont $M$};
\end{tikzpicture}
\par\end{centering}

\caption{Signal Flow Diagram}
\label{fig:signal-flow-diagram}
\end{figure}

\section*{Section}

This is a section.

We can refer to the picture of the signal flow diagram as \figref{signal-flow-diagram}.

We can insert an equation like Euler's equation:

\begin{equation}
e^{j\theta}=\cos\theta+j\cdot\sin\theta\label{eq:euler}
\end{equation}

Then, we can refer to this equation as \eqref{euler}.

\subsection*{Subsection}

This is a subsection.

To fill in the bibliography a bit, I'll cite the following \cite{article,conference,phdthesis,unpublished}.

The bibliography is in DesignCon.bib provided.

% put an optional \clearpage here to put the Bibliography on the next page

\bibliographystyle{ieeetr}
\bibliography{DesignCon}

\end{document}