<html><head><meta name="color-scheme" content="light dark"></head><body><pre style="word-wrap: break-word; white-space: pre-wrap;">% \iffalse meta-comment
%
% Copyright (C) 2013 by Alberto Sartori
% Copyright (C) 2019 by David Lichti
% -------------------------------------------------------
% 
% This file may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either
% version 1.3 of this license or (at your option) any later
% version. The latest version of this license is in:
%
%    http://www.latex-project.org/lppl.txt
%
% and version 1.3 or later is part of all distributions of
% LaTeX version 2005/12/01 or later.
%
% \fi
%
% \iffalse
%
%&lt;package&gt;\NeedsTeXFormat{LaTeX2e}
%&lt;package&gt;\ProvidesClass{embedall}[2019/05/18 v2.0 Automatically embed source files in PDF]
%
%&lt;*driver&gt;
\documentclass{ltxdoc}
\usepackage[notall]{embedall}[2019/05/18]
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage[osf,sc]{mathpazo}
\usepackage{parskip}
\renewcommand\sfdefault{lmsf}
\renewcommand\ttdefault{lmtt}
\usepackage{microtype}
\linespread{1.1}
\usepackage{enumitem}
\setdescription{font=\itshape,leftmargin=2cm,style=sameline}
\usepackage{hyperref}
\EnableCrossrefs         
\CodelineIndex
\RecordChanges
\begin{document}
  \DocInput{embedall.dtx}
\end{document}
%&lt;/driver&gt;
% 
% \fi
%
% \CheckSum{154}
%
% \CharacterTable
%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%   Digits        \0\1\2\3\4\5\6\7\8\9
%   Exclamation   \!     Double quote  \"     Hash (number) \#
%   Dollar        \$     Percent       \%     Ampersand     \&amp;
%   Acute accent  \'     Left paren    \(     Right paren   \)
%   Asterisk      \*     Plus          \+     Comma         \,
%   Minus         \-     Point         \.     Solidus       \/
%   Colon         \:     Semicolon     \;     Less than     \&lt;
%   Equals        \=     Greater than  \&gt;     Question mark \?
%   Commercial at \@     Left bracket  \[     Backslash     \\
%   Right bracket \]     Circumflex    \^     Underscore    \_
%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%   Right brace   \}     Tilde         \~}
%
% \changes{v1.0}{2013/10/10}{Initial version}
% \changes{v2.0}{2019/05/18}{Overhaul using filehook package}
%
% \GetFileInfo{embedall.sty}
%
% \DoNotIndex{\newcommand,\def,\let,\DeclareRobustCommand}
% \DoNotIndex{\newif,\DeclareOption,\ProcessOptions,\relax,\RequirePackage,\fi,\else,\ifcsname,\endcsname,\PackageWarning,\^\^}
% \DoNotIndex{\AtBeginDocument,\IfFileExists,\input,\jobname,\LetLtxMacro,\listxadd,\message,\newlinechar,\xifinlist}
% \DoNotIndex{\embedfile,\currfilename,\AtBeginOfInputs,\AtBeginOfIncludes}
% \DoNotIndex{\Gin@setfile}
% \DoNotIndex{\csvloop,\csv@input@filename}
%
% \title{The \textbf{embedall} package\thanks{This document
%   corresponds to \textsf{embedall}~\fileversion, dated \filedate.}}
% \author{
%    Alberto Sartori -- \texttt{\href{mailto:alberto.sartori.as@gmail.com}{alberto.sartori.as@gmail.com}}\\
%    David Lichti -- \texttt{\href{mailto:dlichtistw@gmx.de}{dlichtistw@gmx.de}}
% }
%
% \maketitle
%
% \embedsource[desc=main source file]
%
% \section{Introduction}
%
% This package is designed to help you storing your projects without losing anything.
% It uses the |filehook| package and some custom patches to hook into several supported import mechanisms.
% These imported files are then attached to the PDF file using the |embedfile| package.
% In particular it can embed images, external TeX files, external code listings, CSV files, and, most importantly, the main TeX file itself.
%
% \section{Usage}
%
% To use the package, simply add |\usepackage{embedsources}| to your document's preamble.
% Without any option, the default behaviour is to attach all supported source file types to the finished document.
% See section~\ref{sec:PackageOptions} for options to change this behaviour.
% No furhter macros are needed, and no change has to be made to the rest of the source.
%
% As of now, this package can hook into |\input| and |\include| using the |filehook| package.
% Furthermore, two hooks for |graphicx| and |csvsimple| are provided.
%
% \subsection{Package Options}\label{sec:PackageOptions}
%
% If the package is loaded without any option, then all hooks are installed.
% In case this is not wanted, each hook can be enabled individually.
% \begin{description}
%    \item[|main|] Attach the main source file.
%        This uses the |\AtBeginDocument| hook.
%    \item[|input|] Attach files loaded with |\input|.
%        This is done using |\AtBeginOfInputs| from the |filehook| package.
%        It also applies to every macro relying on |\input| to load external content.
%    \item[|include|] Attach files loaded with |\include|.
%        This is done using the |\AtBeginOfIncludes| hook.
%    \item[|graphicx|] Attach image files used with |\includegraphics|.
%        This patches some macro in the |graphicx| package, so make sure that it is loaded prior to |embedsources|.
%    \item[|csvsimple|] Attach data files used with the |csvsimple| package.
%        Make sure that it is already loaded.
% \end{description}
% Specifying any of these options will disable all hooks that are not enabled explicitly.
%
% There are some other options for very special cases.
% \begin{description}
%    \item[|all|] Enable all file type hooks.
%        This is the default and the option is mostly redundant.
%        However, it may be used to reenable all hooks, after an explicit type option has disabled them.
%    \item[|notall|] Do not enable all file type hooks.
%        As for the the |all| option, this is mostly useless, since it disables all effects this package was intended for.
%        However, some side effects may remain.
%        Consider not loading the package at all.
%    \item[|compat|] Enable compatibility mode to maintain some functionality from version 1.0.
%        Use this if your document needs the old style |\embedinput| macro.
%\end{description}
%
% \subsection{User Commands}
%
% \DescribeMacro{\embedfile \oarg{options} \marg{filename}}
% Although not defined by this package, it is made available by loading |embedfile|.
% You may use it to manually embed sources or any file, that is not covered by the hooks described above.
% See the |embedfile| documentation for more details.
%
% \DescribeMacro{\embedsource \oarg{options}}
% This macro can be used to embed the current TeX file in case the automatic hook has been disabled.
% Use it inside the file to be loaded.
% The \meta{options} are passed to the |\embedfile| macro.
% 
% \DescribeMacro{\embedinput \oarg{options} \marg{filename}}
% This command is a substitute for |\input{&lt;filename&gt;}| in compatibility mode.
% It adds the feature of attaching the file to the PDF after inserting it in the TeX source.
% The \meta{options} are ultimately passed to the |\embedfile| macro.
% As of version 2.0 with the automatic input file hook enabled, this is not needed anymore.
% Consider using |\embedsource| for manual embedding without the automatic hook.
%
% \section{Compatibility}
%
% This package heavily relies on |filehook|'s\footnote{filehook package: \url{https://ctan.org/pkg/filehook}} file hooks and |embedfile|'s\footnote{embedfile package: \url{https://ctan.org/pkg/embedfile}} file embedding.
% See the compatibility notes in their respective documentations.
%
% Furthermore, hooking into the |graphicx| and |csvsimple| macros is done by patching some of their macros.
% If they have not been loaded when |embedall| is loaded, this will fail.
% If they are loaded or reloaded after |embedall|, these patches may be overwritten.
% To ensure good functionality, load this package after all packages providing import commands.
%
% \StopEventually{}
%
% \section{Implementation}
%
% \subsection{Options}
%
% First, we need some booleans to store package options.
% The switch |embedall@all| acts on all types of hooks.
%    \begin{macrocode}
\newif\ifembedall@all
\embedall@alltrue
%    \end{macrocode}
% The following |embedall@&lt;hook&gt;| can be used to enable specific embedding hooks.
%    \begin{macrocode}
\newif\ifembedall@main
\embedall@mainfalse
\newif\ifembedall@input
\embedall@inputfalse
\newif\ifembedall@include
\embedall@includefalse
\newif\ifembedall@graphicx
\embedall@graphicxfalse
\newif\ifembedall@csvsimple
\embedall@csvsimplefalse
%    \end{macrocode}
% Compatibility mode is disabled by default.
%    \begin{macrocode}
\newif\ifembedall@compat
\embedall@compatfalse
%    \end{macrocode}
%
% Now, declare the actual package options.
%    \begin{macrocode}
\DeclareOption{all}{\embedall@alltrue}
\DeclareOption{notall}{\embedall@allfalse}
%    \end{macrocode}
% The following options correspond to the more specific embedding hooks mentioned above.
% Using any of these options will turn of general embedding off all source file types.
%    \begin{macrocode}
\DeclareOption{main}{\embedall@maintrue\embedall@allfalse}
\DeclareOption{input}{\embedall@inputtrue\embedall@allfalse}
\DeclareOption{include}{\embedall@includetrue\embedall@allfalse}
\DeclareOption{graphicx}{\embedall@graphicxtrue\embedall@allfalse}
\DeclareOption{csvsimple}{\embedall@csvsimpletrue\embedall@allfalse}
%    \end{macrocode}
% Request compatibility mode.
%    \begin{macrocode}
\DeclareOption{compat}{\embedall@compattrue}
%    \end{macrocode}
%
% Now, process these options.
%    \begin{macrocode}
\ProcessOptions\relax
%    \end{macrocode}
%
% Turn on all |embedall@&lt;hook&gt;| if |embedall@all| is |true|.
%    \begin{macrocode}
\ifembedall@all
    \embedall@maintrue
    \embedall@inputtrue
    \embedall@includetrue
    \embedall@graphicxtrue
    \embedall@csvsimpletrue
\fi
%    \end{macrocode}
%
% \subsection{Dependencies}
%
% Load packages for file embedding and file hooks.
%    \begin{macrocode}
\RequirePackage{embedfile}
\RequirePackage{filehook}
\RequirePackage{currfile}
\RequirePackage{etoolbox}
\ifembedall@compat
    \RequirePackage{letltxmacro}
\fi
%    \end{macrocode}
%
% \subsection{Macros}
%
% \begin{macro}{\embedsource}
% We define a shorthand to embed the current source file.
%    \begin{macrocode}
\newcommand\embedsource[1][]{\embedall@embed[#1]{\currfilename}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\embedall@filelist}
% Keep a list of files that have already been attached.
%    \begin{macrocode}
\def\embedall@filelist{}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\embedall@embed}
% This is done to avoid embedding the same file multiple times.
%    \begin{macrocode}
\newcommand{\embedall@embed}[2][]{%
    \xifinlist{#2}{\embedall@filelist}{}{%
        \newlinechar=`\^^J%
        \message{^^J^^Jembedall: Attaching file '#2'.^^J^^J}%
        \embedfile[#1]{#2}%
        \listxadd{\embedall@filelist}{#2}%
    }%
}
%    \end{macrocode}
% \end{macro}
%
% \subsection{Compatibility Commands}
%
% The following macros are only defined in compatibility mode to maintain backward compatibility.
%    \begin{macrocode}
\ifembedall@compat
%    \end{macrocode}
%
% \begin{macro}{\embedall@includegraphics}
% This macro is the modified version of |\includegraphics| command from the |graphicx| package with included the |\embedfile| command.
% First the original |\includegraphics| command is stored inside the not-user-accessible |\embedall@latex@includegraphics|.
%    \begin{macrocode}
    \LetLtxMacro\embedall@latex@includegraphics\includegraphics
%    \end{macrocode}
% |\LetLtxMacro| is used (instead of simply |\let|) because some packages modify the |\includegraphics| command.
% For this reason you can not use the * variant of this command but you have to declare the |clip| option instead.
%
% Then the |\embedall@includegraphics| is defined
%    \begin{macrocode}
    \newcommand\embedall@includegraphics[2][]{%
        \embedall@embed[desc=image]{#2}
        \embedall@latex@includegraphics[#1]{#2}%
    }
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\embedall@listinputlisting}
% This macro is the modified version of |\listinputlisting| command from the |listings| package with included the |\embedfile| command.
% First the original |\listinputlisting| command is stored inside the not-user-accessible |\embedall@latex@listinputlisting|.
%    \begin{macrocode}
    \LetLtxMacro\embedall@latex@lstinputlisting\lstinputlisting
%    \end{macrocode}
% Then the |\embedall@listinputlisting| is defined
%    \begin{macrocode}
    \newcommand\embedall@lstinputlisting[2][]{%
        \embedfile[desc=listing file]{#2}
        \embedall@latex@lstinputlisting[#1]{#2}%
    }
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\embedinput}
% This command can be used as a substitute for |\input| to manually embed the source if the automatic file hook is not enabled.
% Otherwise, it will just call |\input| without further side effects.
% The additional optional parameter sets the input file description in the generated PDF.
%    \begin{macrocode}
    \ifembedall@input
        \DeclareRobustCommand\embedinput[2][]{%
            \input{#2}%
        }
    \else
        \DeclareRobustCommand\embedinput[2][input file]{%
            \input{#2}%
            \embedall@embed[desc={#1}]{#2}%
        }
    \fi
\fi
%    \end{macrocode}
% \end{macro}
%
% \subsection{Installing Hooks}
%
% The actual work happens here.
% First, the main source file is attached.
%    \begin{macrocode}
\ifembedall@main
    \ifembedall@compat
        \IfFileExists{./\jobname.tex}{%
            \embedall@embed[desc=main source file]{\jobname.tex}
        }{}
    \else
        \AtBeginDocument{\embedsource[desc=main source file]}
    \fi
\fi
%    \end{macrocode}
% These macros are provided by the |embedfile| and |currfile| packages.
%
% Then, the hooks for |\input| and |\include| are installed, given the respective switch was enabled.
%    \begin{macrocode}
\ifembedall@input
    \AtBeginOfInputs{\embedsource[desc=input file]}
\fi
\ifembedall@include
    \AtBeginOfIncludes{\embedsource[desc=include file]}
\fi
%    \end{macrocode}
% The macros |\AtBeginOfInputs| and |\AtBeginOfIncludes| are provided by the |filehook| package.
%
% For the |graphicx| hook, we need to patch the |\Gin@setfile| macro to call |\embedfile| after finishing its own work.
% At this point, the full file name including the file name extension will be available as the third argument passed to the macro.
%    \begin{macrocode}
\ifembedall@graphicx
    \ifcsname Gin@setfile\endcsname
        \let\embedall@Gin@setfile\Gin@setfile
        \def\Gin@setfile#1#2#3{%
            \embedall@Gin@setfile{#1}{#2}{#3}%
            \embedall@embed[image file]{#3}%
        }
%    \end{macrocode}
% Issue a warning if |\Gin@setfile| does not exists.
% This could happen in the unlikely case that the internal workings of |graphicx| have changed, or, more likely, because the package was not loaded.
%    \begin{macrocode}
    \else
        \ifembedall@all\else
            \PackageWarning{embedall}{Patching of graphicx requested, but package not loaded. Consider removing the 'graphicx' option.}
        \fi
    \fi
\fi
%    \end{macrocode}
%
% The |csvsimple| hook is very similar to the |graphicx| hook.
% It patches into the |\csvloop| macro which is used by all other user macros to do the actual work.
%    \begin{macrocode}
\ifembedall@csvsimple
    \ifcsname csvloop\endcsname
        \let\embedall@csvloop\csvloop
        \def\csvloop#1{%
            \embedall@csvloop{#1}%
            \embedall@embed[CSV file]{\csv@input@filename}%
        }
    \else
        \ifembedall@all\else
            \PackageWarning{embedall}{Patching of csvsimple requested explicitly, but package not loaded. Consider removing the 'csvsimple' option.}
        \fi
    \fi
\fi
%    \end{macrocode}
% The |\csv@input@filename| macro is used in the |csvsimple| macro to store the input file name.
%
% \Finale
%
\endinput
</pre></body></html>