\NeedsTeXFormat{LaTeX2e}
\ProvidesClass{vita}[1996/10/09
class file ``vita'' to create Curriculum Vitae]
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%
%% (C) Copyright 1995, Andrej Brodnik, ABrodnik@UWaterloo.CA. All
%% rights reserved.
%%
%% This is a generated file. Permission is granted to to customize the
%% declarations in this file to serve the needs of your installation.
%% However, no permission is granted to distribute a modified version of
%% this file under its original name.
%%
%% \CharacterTable
%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%% Digits \0\1\2\3\4\5\6\7\8\9
%% Exclamation \! Double quote \" Hash (number) \#
%% Dollar \$ Percent \% Ampersand \&
%% Acute accent \' Left paren \( Right paren \)
%% Asterisk \* Plus \+ Comma \,
%% Minus \- Point \. Solidus \/
%% Colon \: Semicolon \; Less than \<
%% Equals \= Greater than \> Question mark \?
%% Commercial at \@ Left bracket \[ Backslash \\
%% Right bracket \] Circumflex \^ Underscore \_
%% Grave accent \` Left brace \{ Vertical bar \|
%% Right brace \} Tilde \~}
%%
%%---
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% - based on vita.sty by kcb@hss.caltech.edu
% - 1995/02/07: the first version
% - 1996/10/09: if there is no business address the field is
% left out
%
% User documentation: This class file only provides basic definitions
% =================== of environments, which are then used in class
% option files to instantiate entries for different disciplines. Thus,
% create your document as follows:
%
% \documentclass[<discipline>]{vita}
% \begin{document}
% \name{Andrej Brodnik}
% \businessAddress{First line \\ second line of bussines address}
% \homeAddress{Again \\ multiline address \\ perhaps with phone number}
% \begin{vita}
% % here comes a real Curriculum Vitae for particular <discipline>
% \end{vita}
% \end{document}
%
% where it is assumed that file ``vita<discipline>.clo'' exists and defines
% proper categories used in given discipline. For detail explanation on
% categories in different disciplines see individual ``.clo'' files.
%
% The output will have format:
%
% o on the first page will appear a title ``Curriculum Vitae'' (to
% change it, see below under i18n notes -- internationalization)
% o below will be your name
% o below, side by side, your business and home address headed
% by strings ``Business address'' and ``Home address''
% respectively (to change these strings see below in i18n notes).
% o then will follow the rest of CV as defined by ``<discipline>.clo''
% file.
% o the header of each but first page will include your name and the
% page number.
% o on the last page in the bottom right you will have the current
% date, that is month and year (to change this, see below under
% i18n notes).
%
%------
%
% i18n NOTES: If you are making CV for some other language, you have to
% =========== redefine:
% - title:
% o use command: ``\title{<new title>}''
% o default value: ``Curriculum Vitae''
% - date:
% o use command: ``\today{<date})''
% o default value: ``<current month>, <current year>'' (in English)
% - addresses headers:
% o use command: ``\HeaderBusiness{<new header>}''
% ``\HeaderHome{<new header>}''
% o default value: ``Business address''
% ``Home address''
%
%------
%
% System documentation: class ``vita'' is based on the class
% ===================== ``article''. It changes the title into
% <default value> (see i18n notes) and the name becomes an
% author. Individual categories, publications and references are
% implemented using ``description'' environment.
%
%----------------------------------------
%%%%
%
% Process options and load class article:
%---
\let\@optionsToInput=\@empty
\DeclareOption*{
\IfFileExists{vita\CurrentOption.clo}%
{\edef\@optionToInput{vita\CurrentOption.clo}}%
{\PassOptionsToClass{\CurrentOption}{article}}
}
\ProcessOptions
\LoadClass{article}
%%%%
%
% First all i18n definitions:
%---
\title{Curriculum Vitae}
\renewcommand{\today}{
\ifcase\month\or
January\or February\or March\or April\or May\or June\or
July\or August\or September\or October\or November\or December\fi,
\space\number\year}
\newcommand\HeaderBusiness[1]{\def\@businessAddressHeader{#1}}
\HeaderBusiness{Business Address}
\newcommand\HeaderHome[1]{\def\@homeAddressHeader{#1}}
\HeaderHome{Home Address}
%%%%
%
% Next, header definitions:
%---
\date{\relax}
\newcommand{\name}[1]{
\renewcommand{\@author}{#1} \markright{\protect\small\@author}
}
\newcommand{\businessAddress}[1]{\def\@businessAddress{#1}}
\businessAddress{}
\newcommand{\homeAddress}[1]{\def\@homeAddress{#1}}
\homeAddress{}
%%%%
%
% \maketitle command, which prints out the title and the name of person
%---
\renewcommand{\maketitle}{\newpage
\global\@topnum\z@ % Prevents figures from going at top of page.
\begin{center}
{\LARGE \@title}
\medskip
{\large \@author}
\end{center}
\bigskip
\thispagestyle{plain}
\gdef\@author{}\gdef\@title{}
}
%%%%
%
% ``vita'' environment:
%---
\pagestyle{empty}
\newenvironment{vita}{
% first page is empty style though the following pages have on the
% right side written the name from the \name command
\ifx\@author\@empty\@warning{Missing name command}\fi
% next we start to layout information. First the title and the
% name,
\maketitle
% followed by both addresses,
\begin{tabular*}{\textwidth}{@{\extracolsep{\fill}}ll@{}}
\begin{tabular}[t]{@{}l@{}}
\ifx\@businessAddress\@empty\mbox{}\else
{\small \@businessAddressHeader:}
\\ \@businessAddress
\fi
\end{tabular}
&
\ifx\@homeAddress\@empty\@warning{Missing home address}%
\else
\begin{tabular}[t]{@{}l@{}}
{\small \@homeAddressHeader:}
\\ \@homeAddress
\end{tabular}
\fi
\end{tabular*}
\bigskip
\thispagestyle{empty}
}{ % quite at the bottom of last page we have a date
\par\nopagebreak\vfill\hfill \today
}%end vita environment
%%%%
%
% Curriculum vitae consists of categories which we create using
% command:
%
% \newcategory[The name]{The label}
%
% where <The name> is written in bold character as a small title of
% category. It appears at the left margine of a page. If <The name>
% parameter is missing, it takes the same value as <The label>, which,
% in turn is used to refer to individual category. For example
% commands:
%
% \newcategory{Name of category}
% \newcategory[Name of category]{Name of category}
%
% have the same result. Now, to use category:
%
% \newcategory[Some category]{some other name}
%
% the input has form:
%
% \begin{some other name}
% \item The first item
% \item The second one etc.
% \end{some other name}
%
% and the category will have on the output title ``Some category''.
% Entries in each category are preceded by \item.
%
%-----
% i18n NOTE: One can use as the names of categories strings in
% ========== different languages, but the labels can be the same in
% the same language, which is useful if you have a single CV and you
% want outputs in different languages.
%---
\def\@newCategory[#1]#2{%
\newenvironment{#2}{\medskip\pagebreak[2]\par
\textbf{\small #1}\nopagebreak
\begin{description}}{\end{description}\par}
}
\def\@noNameCategory#1{\@newCategory[#1]{#1}}
\def\newcategory{\@ifnextchar[{\@newCategory}{\@noNameCategory}}
%%%%
%
% Inside categories we have different ``kinds'' (such as different
% publications), which we create using command \newkind. It has the
% same parameters as \newcategory and all comments at command
% newcategory are also valid here.
%---
\def\@newKind[#1]#2{%
\newenvironment{#2}{
\pagebreak[2]
\item \textbf{\small #1}\nopagebreak
\begin{description}
}{ \end{description}\par }
}
\def\@noNameKind#1{\@newKind[#1]{#1}}
\def\newkind{\@ifnextchar[{\@newKind}{\@noNameKind}}
%%%%
%
% There is a special category ``plaincategory'' which entries are
% simply listed without any indentation, and in particular, multiple
% references are separated by \and command. It can be used for
% references.
%---
\def\@newPlainCategory[#1]#2{%
\newenvironment{#2}{
\medskip\pagebreak[2]\par
\textbf{\small #1}\nopagebreak
\renewcommand{\and}{
\end{tabular}
\item[]\begin{tabular}[t]{l}
}
\begin{description}
\item[] \begin{tabular}[t]{l}
}{ \end{tabular}
\end{description}\par
}
}
\def\@noNamePlainCategory#1{\@newPlainCategory[#1]{#1}}
\def\newplaincategory{\@ifnextchar[{\@newPlainCategory}{\@noNamePlainCategory}}
%%%%
%
% Finally, formatting parameters and the possible option to input:
%---
\pagestyle{myheadings}
\parindent 0pt
\nofiles
\ifx\@optionToInput\@empty\relax
\else \input \@optionToInput
\fi